Aldebaran documentation What's new in NAOqi 2.4.3?

Back up my Aldebaran robot user data

1/5 - Making the Aldebaran robot ready for backup

Step Action

Make sure your robot is in version 2.3 or higher.

For further details, see: Upgrading my NAO.

Check the battery level.

Important: make sure the robot battery is fully charged: a power shortage during backup could create a corrupted and unusable file.

Tips: if your battery has a limited autonomy, you should leave the charger plugged during the upgrade. However it could be wise to order a new battery.

Make sure you have installed Choregraphe suite.

For further details, see: Choregraphe suite - Installation Guide.

Launch Memory Backup.

2/5 - Select the task to perform

Step Action

Select Back up ....

../_images/chore_data_backup_restore.png

Note

The applications installed on your robot are managed by the Aldebaran Community website and will not be backed up.

Click the Next button.

3/5 - Connecting to the Aldebaran robot

Step Action

Select a Aldebaran robot in the list, or type his IP address.

../_images/chore_data_backup_select_robot.png

Then click the Next button.

Enter the password of the Aldebaran robot.

../_images/chore_data_backup_login.png
Click the Connect button.
Click the Next button.

4/5 - Selecting the destination file

Step Action

Use the Browse button to select the destination path of the backup file.

../_images/chore_data_backup_path.png
Click the Next button.

5/5 - Finalize the backup

Step Action

Read it carefully and then click the Backup button.

../_images/chore_data_backup_infos.png

Note

You will not be able to pursue if the robot is not plugged.

Once the backup is done, click the Finish button.

../_images/chore_data_backup_logs.png

See also Backup/Restore robot data troubleshooting.